- ページ 19
液晶テレビ Sharp Aquos LC-20AD5EのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp Aquos LC-20AD5E 39 ページ。 Lcd colour television
Sharp Aquos LC-20AD5E にも： 操作マニュアル (39 ページ)
ページを印刷する
Menu operations
4:3 mode
Menu Operation: A (page 2)
The WSS signal has 4:3 auto-switching that allows
you to select between Normal and Panorama.
Selectable
items
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
Panorama
Wide image without side bars
WSS signal Wide screen
4:3 mode "Normal"
Description
4:3 mode "Panorama"
Option menu
Option Settings
Menu Operation: A (page 2)
Selectable items
Power
On
management*
Off
Sleep timer*
Off
2
30 min
60 min
90 min
20 min
DNR
High
Middle
Low
Off
No signal off
On
Off
No operation
On
off
Off
Blue screen
On
Off
Rec screen
On
status
Off
Reset TV
Yes
setting*
3
No
*
This item is visible only when TV is PC mode.
1
*
The status display appears by pressing SLEEP.
2
*
If you have defined a PIN on the "Child lock" screen, the
3
PIN input screen is displayed. Input the four-digit PIN
(0–9) first. (See page 16.)
Description
•
If there is no signal input for
8 minutes, the TV enters the
standby mode.
•
Even if you start using the
PC and the signal inputs
again, the TV stays in
standby mode.
•
The TV turns on again by
pressing
on the remote
control unit. (See page 8.)
You can set "Sleep timer" to
automatically turn off the LCD
TV set.
Produce a clearer image.
You can set the power to
automatically turn off if there
is no signal for 5 minutes.
When set to "On" the TV
will automatically enter
the standby mode if no
operations are performed for
3 hours.
•
Five minutes before the TV
enters standby mode, the
remaining time displays
every minute.
You can set the TV to
automatically change to a
blue screen and mute the
sound if the signal is weak or
absent when TV is TV mode.
This function determines
whether the TV screen switches
on or not when a programmed
timer setting begins.
If you select " Yes " , the TV
turns off. All parameters
settings are reset to the
factory settings and tuning
data will be lost.
-7
GB