- ページ 14
液晶テレビ Sharp aquos LC-20S5E-BKのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp aquos LC-20S5E-BK 24 ページ。 Lcd-kleurentelevisie
Sharp aquos LC-20S5E-BK にも： 操作マニュアル (24 ページ), (オランダ語) 取扱説明書 (24 ページ)
ページを印刷する
Useful Features (continued)
Programmes
Press MENU to display the Menu screen.
2
Press ◀/▶ to select "Setup".
3
Press ▲/▼ to select "Programmes", and press OK.
4
Press ▲/▼ to select the desired item, and press OK.
5
Press END to exit.
[] Automatic search
Perform the procedure above to search for and store new TV programmes after the First Installation routine.
NOTE
•
You can change "Colour system" and "Sound system" only when "Other count." is selected in "Country".
•
See page 8 for details on the search process.
[2] Manual adjustment
Individual settings of programmes can be adjusted.
NOTE
•
Depending on the settings in the colour system of the channels, switching between channels may be slow. If you want to speed up channel
switching, switch "Auto" in "Colour system" to the current reception system (PAL or SECAM).
2
TV only
Selected item
Country
Select your country or area from the displayed items.
Colour system
Auto, PAL, SECAM
Sound system
B/G, I, D/K, L/L', Auto
Start search
Start Automatic search.
Selected item
Choice/Value range
Channel
0–99
Frequency
44.25 – 863.25 (MHz) Receivable frequencies depending on TV norm,
Colour system Auto, PAL, SECAM
Sound system B/G, I, D/K, L/L', Auto
Name
Alphabets, numerical
values (e.g. t, 7, etc.)
Skip
On
Off
Sort
Erase
Choice/Description
Description
The channel changes to the higher or lower channel.
installation site, and range.
Colour norm
TV norm
Programme name (up to 5 characters)
Channel numbers with a "(♦) (RED)" mark on the left
are set to Skip.
Press ▲/▼/◀/▶ to select the desired programme, and
press OK to sort.
•
When OK is pressed, the Move mode is activated.
Press ▲/▼ to move the currently marked
programme to the desired programme position.
When the channel has moved to the desired
position, all the preceding/subsequent channel
position will go up/down.
Press OK to exit the Move mode.
Press ▲/▼/◀/▶ to select the programme to be erased,
and press OK.
•
If you want to erase programmes in a connected
range, select the first programme of the range, and
then select the last one.
Press OK to erase the selected programme(s). All
the subsequent programmes move up.