- ページ 8

液晶テレビ Sharp Aquos LC-26A37MのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp Aquos LC-26A37M 8 ページ。 Lcd colour television

ページを印刷する

Appendix

Troubleshooting

The problems described below are not always caused by malfunctions. Check the TV again before having the

TV serviced.

Problem

• No power.

• Check if you pressed POWER on the remote control unit. (See page 7.)

If the indicator on the TV lights up red, press POWER.

• Is the AC cord disconnected? (See page 3.)

• Has the power been turned on? (See page 7.)

• Unit cannot be operated.

• External inﬂ uences such as lightning, static electricity, etc., may cause improper

operation. In this case, operate the unit after ﬁ rst turning the power off the TV or

unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (e, f) aligned? (See page 5.)

• Remote control unit does not

operate.

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light shining on the remote control sensor?

• Picture is cut off.

• Is the image position correct? (See page 11.)

• Are screen mode adjustments such as picture size made correctly? (See pages 11 to

13.)

• Strange colour, light colour, or

• Adjust the picture tone. (See page 9.)

dark, or colour misalignment.

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 8, 12.)

• Check the input signal setting. (See page 12.)

• Power is suddenly turned off.

• The unit's internal temperature has increased.

Remove any objects blocking the vent or clean.

• Check the power control setting. (See page 10.)

• Is the sleep timer set? (See page 5.)

• No picture.

• Is the connection to external equipment correct? (See page 4.)

• Has the input signal setup been performed correctly after connection? (See page 12.)

• Is the picture adjustment correct? (See page 9.)

• Is the antenna connected properly? (See page 3.)

• Is "On" selected in "Audio Only"? (See page 12.)

• No sound.

• Is the volume too low? (See page 5.)

• The TV sometimes makes a

• This is not a malfunction. This happens when the cabinet slightly expands and

cracking sound.

contracts according to changes in temperature. This does not affect the TV's

performance.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near

a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: f20°C to e60°C.

Resetting the Password

Repeat steps 1 to 2 in Setting a Password. (See pages 10 to 11.)

The Password input screen displays.

If you enter "3001" using 0 – 9, the "Child Lock" setting menu will be displayed.

Enter the 4-digit number as a password using 0 – 9. The new password is now set.

Possible Solution

Speciﬁ cations

Model LC-26A37M

Item

LCD panel

Resolution

Video Colour System

TV-Standard

Function

Receiving

VHF/UHF

Channel

CATV

TV-Tuning System

STEREO/BILINGUAL

Backlight life

Viewing angles

Audio ampliﬁ er

Speakers

Terminals

Rear Antenna input

INPUT 1

INPUT 2

INPUT 3

INPUT 4

INPUT 5

INPUT 6 (PC input)

OUTPUT

RS-232C

OSD language

Power Requirement

Power Consumption

without stand

Dimensions

(W g H g D)

with stand

without stand

Weight

with stand

Operating Temperature

• As a part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for

product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production

units. There may be some deviations from these values in individual units.

Handling and precautions with the wall-mounted TV

CAUTION

• This TV should be mounted on the wall only with the AN-37AG3 (SHARP) wall mount bracket. The use

of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the Liquid Crystal Television requires special skill that should only be performed by

qualiﬁ ed service personnel. Customers should not attempt to do the work themselves. SHARP

bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

• You can ask a qualiﬁ ed service personnel about using an optional AN-37AG3 bracket to mount

the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

LC-32A37M

26o (648 mm) Advanced Super

32o (800 mm) Advanced Super

View & BLACK TFT LCD

1,049,088 pixels (1366 g 768)

PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

PAL: B/G, D/K, I SECAM: B/G, D/K, K/K

NTSC: M

44.25—863.25 MHz

S1—S41ch (including Hyperband)

Auto Preset 99 ch

NICAM: B/G, I, D/K A2 stereo: B/G

60,000 hours (at Backlight Standard position)

H : 176º V : 176º

10W g 2

10 g 4 cm 2pcs

UHF/VHF 75 q DIN type

HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)

AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)

S-VIDEO in, VIDEO in, AUDIO in

15 pin mini D-sub, AUDIO in (common use with INPUT 1) (Ø 3.5 mm jack)

AUDIO out

9 pin D-sub male connector

English/Simpliﬁ ed Chinese/Traditional Chinese/Arabic

AC 110—240 V, 50/60 Hz

88 W (0.9 W Standby)

97 W (0.9 W Standby)

652 g 445 g 123 mm

788 g 519 g 123 mm

652 g 504 g 235 mm

788 g 575 g 235 mm

7.5 kg

9.5 kg

9.0 kg

11.0 kg

0°C — 40°C

LC-37A37M

37o (940 mm) Advanced Super

View & BLACK TFT LCD

126 W (0.9 W Standby)

916 g 595 g 123 mm

916 g 660 g 255 mm

12.5 kg

14.5 kg