- ページ 12

液晶テレビ Sharp AQUOS LC-26D44SのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AQUOS LC-26D44S 40 ページ。 Lcd colour television

ページを印刷する

1. Connecting a Pc

Using external equipment

Connecting a decoder

You can use the EXT 1 terminal when connecting a

decoder and other audiovisual equipment.

EXT 1

SCART cable*

NOTE

• In cases when the decoder needs to receive signal from

the TV, make sure to set "Decoder" to "EXT1" in the

Programme Setup "Manual Adjust" menu. (See page 16.)

• Do not connect the decoder to the EXT 2 terminal.

Connecting a PC

Use the EXT 4 terminals to connect a PC.

EXT 4

ø 3.5 mm stereo minijack cable*

EXT 4

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

NOTE

• The cables marked with * are commercially available items.

• The PC input terminals are DDC1/2B-compatible.

• Refer to page 33 for a list of PC signals compatible with the

TV.

• When connecting to a PC, the correct input signal type is

automatically detected.

Decoder

RGB cable*

Using AV Link function

This TV incorporates three typical AV Link functions

for smooth connections between the TV and other

audiovisual equipment.

One Touch Play

While the TV is in standby mode, it automatically turns

on and plays back the image from the audiovisual

source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR

has the WYSIWYR button, you can automatically start

recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers the channel preset information

from the tuner on the TV to the one on the connected

audiovisual equipment (e.g. VCR) via the EXT 2

terminal.

NOTE

• Refer to operation manuals of each external equipment for

the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully

wired SCART.

• The use of the AV Link function is only possible if the

TV-set has enforced a complete auto-installation with the

connected audiovisual equipment (page 8, Initial auto

installation).

The availability of the AV Link function depends on

the audiovisual equipment used. Depending on the

manufacturer and type of equipment used, it is possible

that the described functions may be completely or partially

unusable.