- ページ 38
液晶テレビ Sharp AQUOS LC-32BX6HのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AQUOS LC-32BX6H 50 ページ。 Lcd colour television
ページを印刷する
Useful adjustment settings
Auto Sync. adjustment
(PC input mode only)
For automatically adjusting the PC image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "PC Setup", and then
press ENTER.
4
Press a/b to select "Auto Sync.", and then
press ENTER.
5
Press a/b to select "Yes", and then press
ENTER.
• Auto Sync. starts.
NOTE
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Fine Sync. adjustment
(PC input mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "PC Setup", and then
press ENTER.
4
Press a/b to select a specific adjustment
item among "H-Position", "V-Position",
"Clock" and "Phase".
Input Signal
Auto Sync.
H-Position
[90]
V-Position
[60]
Clock
[90]
Phase
[ 8]
Reset
Selected item
Centres the image by moving it to the left or
H-Position
right.
Centres the image by moving it to the up or
V-Position
down.
Adjusts when the image flickers with
Clock
vertical stripes.
Adjusts when characters have low contrast
Phase
or when the image flickers.
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
–
+
–
+
–
+
–
+
Description
37