- ページ 6

液晶テレビ Sharp AQUOS LC-37BG1EのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AQUOS LC-37BG1E 42 ページ。 Aquos lcd colour television

Quick guide

Setting the TV

Standard DIN45325

plug (IEC 169-2)

75 q coaxial cable

Cable

clamp

(large)

Bundle the

cables with

the clamp.

Antenna

Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on the

back of your TV set to receive digitally/terrestrially broadcast stations.

An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered

commercially. In an active antenna its power is supplied via the antenna input terminal.

The supply voltage (5V) must be correspondingly set under "Supply voltage". (Page 16)

* Ferrite Core

The Ferrite Core should be permanently attached and never removed from the AC cord.

Setting the TV on the wall

• This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 36.)

The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the LCD Colour TV requires special skill that should only be performed by qualiﬁ ed service personnel.

Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting

or mounting that results in accident or injury.

• You can ask a qualiﬁ ed service personnel about using an optional bracket to mount the TV to the wall.

Cable tie

Before making any

connections, press

down on the upper

hooks and remove the

rear terminal covers

towards you.

Ferrite Core *

Place the TV close

to the AC outlet,

and keep the power

plug within reach.

AC cord

Cable clamp (small)

Bundle the AC cord with the clamp (small).