- ページ 8

テレビ Sharp 14V-R70MのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp 14V-R70M 43 ページ。

14V-R70M

SELF ADJUSTMENT

H-VCO

1. When there is H-VCO self-adjustment key input for adjustment item H-VCO, self-adjustment is performed.

2. H-FREE(1chip) is set to 1.

3. H-OUT is set by intelligent monitor output.

4. IM input is set as TIM input.

5. H-VCO(1chip) data is changed so that the number of input pulse is 125 inside 8ms interval.

6. When adjustment completed, OSD display and H-VCO self-adjustment status data of EEPROM are updated.

7. H-FREE(1chip), intelligent monitor output and IM input mode are recovered.

RF-AGC

1. When there is RF-AGC self-adjustment key input for adjustment item RF-AGC, self-adjustment is performed.

2. AGC-OUT is set by intelligent monitor output.

3. IM input is set as AD input.

4. By decreasing RF-AGC (1chip) data from current RF-AGC adjustment value to 0, AFT input voltage becomes the

maximum setting value.

5. Increase RF-AGC(1chip) data, when AFT input voltage is at (max. 0.3V) point, adjustment is completed.

6. When adjustment completed, OSD display and RF-AGC self-adjustment status data of EEPROM are updated.

7. Intelligent monitor output and IM input mode are recovered.

PIF-VCO

1. When there is PIF-VCO self-adjustment key input for adjustment item PIF-VCO, self-adjustment is performed.

2. VIF-DEF(1chip) is set to 1.

3. AFC is set by intelligent monitor output.

4. IM input is set as AD input.

5. VIF-VCO(1chip) data is changed so that input voltage becomes 2.5V.

6. When adjustment completed, OSD display and PIF-VCO self-adjustment status data of EEPROM are updated.

7. VIF-DEF(1chip), intelligent monitor output and IM input mode are recovered.