- ページ 10

テレビ Sharp 21LF-90HのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp 21LF-90H 35 ページ。 Typical connections
Sharp 21LF-90H にも：接続マニュアル (4 ページ), 操作マニュアル (34 ページ), 操作マニュアル (34 ページ), クイック・スタート・マニュアル (4 ページ)

ページを印刷する

ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65

Downloaded from:

http://www.usersmanualguide.com/

3. Replace the battery cover.

Notes:

Remove batteries if weak or if the unit is not

in use for long periods.

Do not mix old and new batteries.

Incorrect installation of the batteries may

damage the remote control.

Switching the TV ON/OFF

You can operate your TV both using the

remote control handset and onset but-

tons.

To switch the TV on

Your TV will switch on in two steps:

1- Press the power button located on the front

of the TV. Then the TV switches itself to

standby mode and the RED LED located

below the TV turns on.

2- To switch on the TV from stand-by mode

either:

Press a digit button on the remote control so

that a programme number is selected,

or,

Press Power button and

buttons on the TV or -P/CH or P/CH+ but-

tons on the remote control respectively, so

the TV will switch on and the RED Led will

turn GREEN.

To switch the TV off

Press the stand-by button on the remote

control, so the TV will switch to stand-by

mode and the GREEN LED will become

RED,

or,

Press the power button located on the front

of the TV.

Initial Settings

The message PLEASE CHECK ANTENNA

CABLE AUTO. PROGRAMMING SYSTEM will

be displayed when you turn on your TV for

the first time.

Note: If you connect Video Recorder to your TV

via antenna input (ANT socket); to tune the

VCR channel automatically you must set the

VCR in play mode before you start APS.

To cancel APS before starting, press 79

button.

1- Select LANGUAGE with or

button, then press the or but-

ton to select a menu language.

2- Select COUNTRY with

button, then press the or but-

ton to select the correct country.

? : OTHER

D : GERMANY SF : FINLAND

A : AUSTRIA

CH : SWITZERLAND NL :NETHERLANDS

I : ITALY

F : FRANCE

B : BELGIUM

DK : DENMARK

S : SWEDEN

3- Press the

select STANDARD. This, will effect

CH or CH

the sort process in APS.

4- Select START with or but-

ton, then press the button to start

A.P.S.

A.P.S., (Automatic Programming System)

automatically programmes the received

channels in your TVs programme numbers.

During A.P.S.,

displayed. After A.P.S. is finalized, the PRO-

GRAM. menu appears.

- 9 -

: NORWAY

UK : UNITED KINGDOM

P : PORTUGAL

E : SPAIN

TR : TURKEY

EIR: IRELAND

buttons to

A.P.S. IS RUNNING

will be

06.01.2004, 15:37