- ページ 3

電源 DIGISYSTEM AFV2000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DIGISYSTEM AFV2000 9 ページ。 Variable frequency vibrators power supply
DIGISYSTEM AFV2000 にも：取扱説明書 (9 ページ), 取扱説明書 (9 ページ)

ページを印刷する

DEVICE DESCRIPTION

The vibrators power supply is very compact and easy to install.

With reference to the drawing at the bottom of this manual, it will be very simple to identify the

most important components.

Two holes (diam. 6 mm) will allow to fix the box to the structure which will support the device.

Electrical connections are made with a 6 and with a 9 poles terminal box (see wiring options

table at page 9).

The mains supply is protected with fuses inside the box.

The vibration frequency is selected with 4 rotating selectors (SW1) located on front panel (the

most left digit are hundreds of Hz, the second are tens, the third are units and the most right are

tenths of Hz).

The vibration intensity may be regulated with a potentiometer or through a voltage reference 0-

5V (the minimum and maximum limits of potentiometer may be regulated with trimmers MIN e

MAX accessible on front panel).

Overloads are limited electronically (by a circuit with autoreset) and are signaled from a red led.

The power supply is shipped with autostart on power-on (switch SW2 on front panel = up).