- ページ 22

ステレオシステム Sharp 92L2390137W010のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp 92L2390137W010 28 ページ。

ページを印刷する

1. Specifications

Recording to a cassette tape

CD-BK137W

Before recording:

z When recording important selections, make a preliminary test to ensure that the

desired material is properly recorded.

z SHARP is not liable for damage or loss of your recording arising from malfunction

of this unit.

z The volume and sound controls can be adjusted with no effect on the recorded

signal (Variable Sound Monitor).

z For recording, use only normal tapes. Do not use metal or CrO tapes.

E-21

ENGLISH

Programmed play (See page 16.)

Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback

only.

„ Recording from a CD (CDs)

You can record 3 CDs continuously.

Press the ON/STAND-BY button to turn the power on.

Load a cassette into the TAPE 2 cassette compartment with the

side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

Press the CD button and load the desired disc.

Press one of the

1 -

3 buttons on the remote control to select

the disc to be recorded first.

Press the REC PAUSE

(

)

button.

Recording will be paused.

Press the

button on the main unit or the TAPE 2

the remote control to start recording.

z CD playback will start approximately 7 seconds after the tape starts.

z Recording is started from the selected CD. When the playback of the last disc

is finished or the end of the tape is reached, the CD and the cassette will stop

automatically.

To perform programmed recording:

1 Programme discs and tracks. (See page 16.)

2 Press the REC PAUSE

(

) button.

3 Press the

(TAPE 2

) button.

To stop recording:

Press the

(CD ) button.

The CD and tape will stop.

Note:

When the end of the tape is reached whilst recording, the CD player will display the

track number which was being played at that time, and stop automatically. If you want

to restart recording from the beginning of the interrupted track, turn over the tape,

press the REC PAUSE

(

) button and then the

tracks have been stored in memory using the programmed recording, recording will

restart from the first track stored in memory.)

01/8/28

CD-BK137W(X)E3.fm

button on

(TAPE 2

) button. (If