- ページ 18

ステレオシステム Sharp CD-BA300のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-BA300 32 ページ。 Cdba300 operation manual
Sharp CD-BA300 にも: クイックマニュアル (4 ページ)

Sharp CD-BA300 操作マニュアル

Starting playback with a desired track

You can play a disc starting with the desired track.
1
While in the stop mode, press one of the s s s s s 1 - s s s s s 3 buttons or
DISC SKIP button to select the desired disc.
2
Press the 5 3
5 3 PRESET X X X X X or W W W W W PRESET 2 4
5 3
5 3
5 3
select the desired track.
Selected track number
You can also select a track by pressing the 3 / 5
the remote control.
3
Press the 0/R
0/R (0 R
0 R) button to start playback.
0/R
0/R
0/R
0 R
0 R
0 R
The playback of the selected track is started.
When the last track of the disc with the selected track is played, the next disc
will be automatically started.
To stop playback:
Press the
(CD ) button.
Notes:
When the DISC SKIP button is pressed during playback, playback will begin auto-
matically from the next disc.
When one of the s 1 - s 3 buttons is pressed during playback, playback of the
selected disc will begin automatically.
18
*BA300_P18_19
18
Selected disc number
2 4 button to
2 4
2 4
2 4
3 / 5 or 2 / 4
2 / 4 button on
3 / 5
3 / 5
2 / 4
2 / 4
3 / 5
2 / 4

Repeat or Random Play

Repeat Play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the 0/R (0 R) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed Play" section and then press the 0/R (0 R)
button twice.
To cancel repeat play:
Press the 0/R (0 R) button again.
"R" will go out.
Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
To cancel random play:
Press the 0R button.
Notes:
If you press the 2 / 4 button during random play, you can move to the track
selected next by the random operation. On the other hand, the 3 / 5 button
does not allow you to move to the previous track. The beginning of the track being
played will be located.
In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After using repeat or random play, be sure to press the
Otherwise, the disc(s) will play continuously.
00.11.16, 2:51 PM
(CD ) button.