- ページ 31

ステレオシステム Sharp CD-DD4500のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-DD4500 48 ページ。 Cddd4500 operation manual
Sharp CD-DD4500 にも：クイックマニュアル (6 ページ)

Changing the Speaker Setting

You can change the setting as you like.

The initial set up was made when shipped from the factory.

The unit can be used as it is, straight out of the box.

Speaker size setting

Press the MENU button repeatedly to select "SP SIZE".

Within 8 seconds, press the ITEM button to select "FRONT".

The front speaker indicators will light up.

Within 8 seconds, use the SET UP ( W W W W W or X X X X X ) button on the re-

mote control to select "LARGE" or "SMALL".

LARGE:When the front speakers can reproduce low frequencies (speakers

which can reproduce sounds lower than 60 Hz)

SMALL: When the front speakers cannot reproduce extremely low frequencies

Repeat the operation in steps 2 and 3 above to select "SUR-

ROUND", "CENTER" and "S-WOOFER".

Each of these items can be set separately.

Surround speakers:

Center speaker:

Subwoofer:

YES:

When the speakers are connected

NO:

When no speaker is connected (When NO is selected, the indica-

tor for that speaker position will go out.)

INT:

Setting of the internal subwoofer

EXT:

Setting of the external subwoofer (see page 39.)

Note:

When all 5 speakers have been connected, set each of the items to "YES" and the

subwoofer to "SW-INT".

The sound is output from the subwoofer when in the Bypass/Virtual mode, even if

the setting of subwoofer is changed.

disappear

CD-DD4500