- ページ 20

ステレオシステム Sharp CD-DP900EのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-DP900E 32 ページ。 Mini component system
Sharp CD-DP900E にも: クイックマニュアル (4 ページ)

Sharp CD-DP900E 操作マニュアル
Listening to the radio (continued)
CD-DP900E

Memorising a station

You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 19.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the PRESET ( or ) button to select the
preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is mem-
orised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
20
Tuning (See page 19.)

To recall a memorised station

Press the PRESET ( or ) button for less than 0.5 seconds to select
the desired station.
Preset channel
This can be operated by pressing the TUNER PRESET (
mote control.

To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the PRESET (
or
) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
This can be operated by pressing the TUNER PRESET (
remote control.
2
Press the PRESET (
or
) button again when the desired station is located.

To erase entire preset memory

1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the EQUALIZER/X-BASS/
DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
02/1/8
CD-DP900E(UK)_2.fm
Frequency and frequency band
or
) button on the re-
or
) button on the