- ページ 37

ステレオシステム Sharp CD-DP900HのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-DP900H 40 ページ。 Mini component system
Sharp CD-DP900H にも：操作マニュアル (40 ページ)

ページを印刷する

1. Specifications

Cassette deck

Symptom

Cannot record.

Cannot record tracks with proper

sound quality.

Cannot erase completely.

Sound skipping.

Cannot hear treble.

Sound fluctuation.

Cannot remove the tape.

Remote control

Symptom

The remote control does not oper-

ate.

Condensation

Sudden temperature changes, storage or operation in an extremely humid environ-

ment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on

the transmitter on the remote control.

Condensation can cause the unit to malfunction. If this happens, leave the power on

with no disc (or cassette) in the unit until normal playback is possible (about 1 hour).

Wipe off any condensation on the transmitter with a soft cloth before operating the

unit.

Downloaded From Disc-Player.com Sharp Manuals

Possible cause

Is the erase-prevention tab removed?

Is it a normal tape? (You cannot record on

a metal or CrO tape.)

Is there any slack?

Is the tape stretched?

Are the capstans, pinch rollers, or heads

dirty?

If a power failure occurs during playback,

the heads remain engaged with the tape.

Do not open the compartment forcibly.

Wait until electricity resumes.

Possible cause

Is the AC power lead of the unit plugged

in?

Is the battery polarity respected?

Are the batteries dead?

Is the distance or angle incorrect?

Does the remote control sensor receive

strong light?

If trouble occurs

When this product is subjected to strong external interference (mechanical shock,

excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

Set the unit to the stand-by mode and turn the power on again.

If the unit is not restored in the previous operation, unplug and plug in the unit,

and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

Clearing all the memory (reset)

Press the ON/STAND-BY button to enter the power stand-by mode.

Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO

button, press the ON/STAND-BY button until "CLEAR AL" appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings,

tuner preset, and CD programme.

Before transporting the unit

On the back of this unit is equipped with a transport screw in order to prevent damage

during transportation.

Press the ON/STAND-BY button to turn the

power on.

Press the CD button.

Press the

OPEN/CLOSE button to open

the disc tray.

Remove all CDs inserted in the unit.

Press the

OPEN/CLOSE button to close

the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the

stand-by mode, and then unplug the AC

power lead from the wall socket.

Insert the transport screw into the back of the unit

and tighten it with a flat head screwdriver or a coin.

02/1/9

CD-DP900H(H)_3.fm

CD-DP900H

ENGLISH

E-30