- ページ 17
ステレオシステム Sharp CD-ES77のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-ES77 36 ページ。 Sharp mini component system cd-es700 cd-es77
ページを印刷する
" Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
" After the last track on the fifth disc is played, the CD player stops
automatically.
" When there is no CD in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a CD.
To exchange other CDs while playing a disc:
Press one of the
1 -
5 buttons for the disc not being played and
within 5 seconds, press the OPEN/CLOSE button and exchange
discs.
To remove the CDs:
In the stop mode, press the
1 -
press the OPEN/CLOSE button.
Caution:
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
" Do not push the disc tray while it is moving.
" If the power fails while the tray is open, wait until the power is
restored.
" If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
" If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Auto power on function:
When you press any of the following buttons, the unit turns on.
" CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
"
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
5 button and within 5 seconds,
! Various CD functions
Function
Main unit
Play
Stop
Pause
Track up/
Track down
Fast for-
ward/Fast
reverse
Notes:
" Track up/track down and fast forward/fast reverse are possible
only within individual discs.
" When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)
Remote
Operation
control
Press in the stop
mode.
Press in the playback
mode.
Press in the playback
mode. Press the
button to resume play-
back from the paused
point.
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
CD-ES700
CD-ES77
/
17