- ページ 13

ステレオシステム Sharp CD-ES770のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-ES770 36 ページ。 Mini component system
Sharp CD-ES770 にも：クイック・スタート・マニュアル (2 ページ), サービスマニュアル (14 ページ), サービスマニュアル (14 ページ), サービスマニュアル (14 ページ)

Remote control

Battery installation

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

1 Open the battery cover.

2 Insert the batteries according to the direction indicated in

the battery compartment (back of the battery cover).

When inserting or removing the batteries, push them toward the

battery terminals.

3 Close the cover.

Precautions for battery use:

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if the unit will not be used for long periods

of time. This will prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to

malfunction.

Battery removal:

Open the battery cover and pull up the battery to take out.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the

operation becomes erratic.

Periodically clean the transmitter on the remote control and the

sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may interfere with

operation. Change the lighting or the direction of the unit.

Keep the remote control away from moisture, heat, shock, and

vibrations.

Test of the remote control

Check the remote control after checking all the connections (see

pages 10 - 12).

Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you

can enjoy music.

8" - 20"

(0.2 m - 6 m)

CD-ES770

Remote sensor