- ページ 32

ステレオシステム Sharp CD-ES900のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-ES900 36 ページ。 Sharp operation manual mini component system cd-es900 cp-es900
Sharp CD-ES900 にも：操作マニュアル (36 ページ)

ページを印刷する

CD-ESg00

CD-ES99

•

Headphones

• Before plugging h_or unplugging the headphones, reduce the vol-

ume.

• Be sure your headphones have a 1/8" (3.5 mm) diameter plug

and are between I6 ohms and 50 ohms impedance. The recom-

mended impedance is 32 ohms.

• Plugging in the headphones disconnects the speakers automati-

cally. Adjust the volume using the VOLUME control.

Troubleshooting

chart

Many potential problems can be resolved by the owner without call-

ing a service technician.

If something is wrong with this product, check the following before

calling your authorized SHARP dealer or service center.

•

General

Symptom

Possible cause

• The clock is not set to the

• Did a power failure occur? Reset

correct time.

the clock. (Refer to page I5.)

• When a button is pressed,

• Set the unit to the power stand-

the unit does not respond,

by mode and then turn it back on.

• If the unit still malfunctions, reset

it. (Refer to page 33.)

• No sound is heard.

• Is the volume level set to "0"?

• Are the headphones connected?

• Are the speaker wires discon-

nected?

•

CD player

Symptom

Possible cause

• Playback does not start.

• Is the disc loaded upside down?

• Playback stops in the mid-

• Does the disc satisfy the stan-

die or is not performed

dards?

properly.

• Is the disc distorted or

scratched?

• Ptayback sounds are

• Istheunitlocatednearexcessive

skipped, or stopped in the

vibrations?

middle of a track.

• Is the disc very dirty?

• Has condensation formed inside

the unit?