- ページ 13
ステレオシステム Sharp CD-SW440NのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-SW440N 17 ページ。 Sharp mini component system operation manual
ページを印刷するTimer and sleep operation (Remote control only) (continued)
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The " " indicator will blink during timer
playback.
The "DAILY" indicator will blink during timer playback.
12
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is canceled. Cancel
the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
"USB" or "AUDIO IN" in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
"Canceling the timer setting" of this page.
Checking the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER CALL", and press the MEMORY button.
Canceling the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER OFF", and press the MEMORY button.
Timer will be canceled (the setting will not be
canceled).
MI N I C O MPO N EN T S YST EM
CD-SW440
FUNCTION
POWER
ON/STAND-BY
VOL
PUSH
OPEN
or
button to
or
button to
or
button to
or
button to
E-12
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER ON", and press the MEMORY button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
4
"SLEEP" will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
While "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1
While "SLEEP" is indicated, press the SLEEP button.
2
Within 10 seconds, press the SLEEP button repeatedly
to select "SLEEP 00".
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 9, page 11).
Sleep timer
Timer playback
setting
setting
90 minutes
Sleep operation will
automatically stop
or
button to
or
button to
30
....... 80
90
End
time
Desired time
Timer playback
start time