- ページ 11

ステレオシステム Sharp CD-XP120WのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-XP120W 32 ページ。

! Setting the FM/AM span selector

The International Telecommunication Union (ITU) has established

that member countries should maintain either a 100 kHz or a 50 kHz

interval between broadcasting frequencies of FM stations and 10

kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz

zones (regions 1 and 3), and the 100/10 kHz zone (region 2).

Before using the unit, set the SPAN SELECTOR switch (on the rear

panel) to the interval (span) of your area.

To change the tuning zone:

1 Press the ON/STAND-BY button to enter the stand-by mode.

2 Set the SPAN SELECTOR switch (on the rear panel) as follows.

" For 100 kHz FM interval (10 kHz in AM)

" For 50 kHz FM interval (9 kHz in AM)

3 Whilst pressing down the TUNER (BAND) button and the DISC

SKIP button, press the ON/STAND-BY button until "CLEAR" ap-

pears.

Caution:

This operation will erase all data stored in memory including clock,

timer settings, tuner preset, and CD programme.

! Demonstration mode

The first time the unit is plugged in, the

unit will enter the demonstration mode.

You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode),

press the EQUALIZER/X-BASS/DEMO button. The demonstration

mode will be cancelled and the display will disappear.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the EQUAL-

IZER/X-BASS/DEMO button again.

Note:

When the power is on, the EQUALIZER/X-BASS/DEMO button can

be used to select the pre-programmed equaliser and extra bass

modes.

100/10

Press the ON/STAND-BY button to turn the power on.

50/9

After use:

Press the ON/STAND-BY button to enter the power stand-by

mode.

02/5/27

CD-XP120W(A)1.fm

CD-XP120W

ENGLISH

E-10