- ページ 10
ステレオシステム Sharp CD-XP205VのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-XP205V 30 ページ。 Video cd mini system
Sharp CD-XP205V にも： サービスマニュアル (30 ページ)
ページを印刷するCD-XP205V
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 14 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 10-1)
1. Remove the screw (A1) x 1 pc., to bend the hooks (A2) x 5
pcs., to remove the loading motor.
How to remove the pickup (See Fig. 10-2)
1. Remove the stop washer (B1) x 1 pc., to remove the gear
(B2) x 1 pc.
2. Remove the screws (B3) x 2 pcs., to remove the shaft
(B4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
MECHANISM SECTION
• • • • • Driving Force Check
Torque Meter
Play: TW-2111
• • • • • Torque Check
Torque Meter
Play: TW-2111
30 to 80 g.cm
Fast forward: TW-2231
—
Rewind: TW-2231
—
All manuals and user guides at all-guides.com
ADJUSTMENT
Specified Value
Tape 1: Over 80 g
Tape 2: Over 80 g
Specified Value
Tape 1
Tape 2
30 to 80 g.cm
70 to 180 g.cm
70 to 180 g.cm
Loading
Tray
Stop Washer
(B3)x2
(B1)x1
ø2.6x6mm
Shaft
Gear
(B4)x1
(B2)x1
• • • • • Tape Speed
Test Tape
Adjusting
Normal
MTT-111
Variable
speed
Resistor in
motor.
TAPE MECHANISM
Tape
Motor
Variable Resistor in motor
– 10 –
Loading
Motor PWB
(A1)x1
Loading
ø3x10mm
Motor
(A2)x5
Figure 10-1
Pickup
CD Mechanism
Figure 10-2
Specified
Instrument
Value
Connection
Point
3,000 ± 30 Hz
Speaker
Terminal
(Load
resistance:
6 ohms)
Figure 10-3