- ページ 31

ステレオシステム Sharp XL-MP150のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp XL-MP150 42 ページ。 Micro component system
Sharp XL-MP150 にも：クイック・スタート・マニュアル (2 ページ), 操作マニュアル (42 ページ)

ページを印刷する

Sequential recording from several discs:

1 Perform steps 1 - 6 in "Recording from a CD or MP3/WMA disc"

on page 30.

2 Within 5 seconds, press the

or the

( ) button for side B.

To perform programmed recording:

1 Program discs and tracks (see pages 21).

2 Press the

button.

3 Press the

( ) button to record on side A, or the

for side B.

To stop recording:

Press the

(TAPE ) button.

The disc and tape will stop.

Note:

To record on both sides, begin with side A. (If recording is started

from side B, the tape will not switch over to side A.)

Auto restart function:

If the recording side is switched from side A to B during recording,

the system will record the interrupted track on side B from its begin-

ning. The recording will be made without cutting the beginning of the

track on side B.

( ) button to record on side A,

( ) button

To interrupt recording:

Press the

To resume recording, press the same recording button you pressed

in step 5. Other buttons do not allow resuming.

To stop recording:

Press the

Note:

If you hear a whistling noise while recording an AM station, move the

AM loop antenna.

1 Press the TAPE button.

2 Follow steps 2 - 5 in "Recording from the radio".

Recording from the radio

Tune in to the desired station (see page 26).

Load a cassette into the cassette compartment with side A

facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button to choose one side or both sides.

... To record on both sides.

... To record on only one

side.

Press the

button.

Recording will be paused.

Press the

( ) button to record on side A, or the

button for side B.

To record on both sides, begin with side A. (If recording is start-

ed from side B, the tape will not switch over to side A.)

button.

(TAPE ) button.

Erasing recorded tapes

XL-MP150

( )