- ページ 7
ステレオシステム Sharp XL-S10のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp XL-S10 44 ページ。 Sharp deck operation manual xl-s10
Sharp XL-S10 にも： 操作マニュアル (31 ページ)
ページを印刷する
E
Market
XLS10
Service Manual
CHAPTER 3.
XL-S10
Audio
MECHANICAL DESCRIPTION
[1] DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and
reassembling it, to keep it safe and ensure excellent performance:
1) Take cassette tape and compact disc out of the unit.
2) Be sure to remove the power supply plug from the wall outlet
before starting to disassemble the unit.
3) Take off nylon bands or wire holders where they need to be
removed when disassembling the unit. After servicing the unit,
be sure to rearrange the leads where they were before disas-
sembling.
4) Take sufficient care on static electricity of integrated circuits and
other circuits when servicing.
STEP
REMOVAL
1
Top Cabinet
1. Screw...........................(A1) x 5
2. Socket.........................(A2) x 2
3. Flat Cable....................(A3) x 1
2
Side Panel
1. Screw...........................(B1) x 4
3
Rear Panel
1. Screw..........................(C1) x 3
2. Screw..........................(C2) x 2
4
Main PWB
1. Screw..........................(D1) x 2
2. Socket.........................(D2) x 2
3. Socket.........................(D3) x 1
5
Front Panel
1. Screw...........................(E1) x 2
6
Power PWB
1. Screw...........................(F1) x 2
2. Screw...........................(F2) x 1
7
Display PWB
1. Knob............................(G1) x 1
2. Screw..........................(G2) x 8
8
Tape Mechanism
1. Screw..........................(H1) x 1
2. Screw..........................(H2) x 4
9
Open/Close
1. Screw...........................(J1) x 1
Switch PWB
2. Hook............................(J2) x 2
10
CD Mechanism
1. Screw...........................(K1) x 4
Note 1:
After removing the connector for the optical pickup from the connector,
wrap the conductive aluminium foil around the front end of the connec-
tor so as to protect the optical pickup from electrostatic damage.
PROCEDURE
FIGURE
1
1
1
2
2
3
3
4
4
5
5
3 – 1
Open/Close
Top Cabinet
Switch PWB
(A3)x1
CD Mechanism
Top Cabinet
(A1)x1
ø3x10mm
Side Panel
(Right)
(B1)x2
ø3x10mm
Rear Panel
Figure 1
(D3)x1
Top Cabinet
(D2)x1
Power PWB
Figure 2
Front Panel
(F1)x2
ø3x10mm
(E1)x2
Power
ø3x10mm
PWB
Figure 3
XL-S10
(A2)x2
(A1)x1
ø3x10mm
(B1)x2
ø3x10mm
(A1)x1
ø3x10mm
(A1)x2
ø3x10mm
(C1)x1
ø3x10mm
Side Panel
(Lift)
(C1)x2
ø3x10mm
(D1)x2
ø3x10mm
(D2)x1
(C2)x2
ø3x10mm
Main PWB
(F2)x1
ø3x10mm
PWB
AC cord