- ページ 13
オール・イン・ワン・プリンター Sharp AL-1633のPDF ソフトウェア・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AL-1633 20 ページ。 Digital multifunctional system
Sharp AL-1633 にも: オンラインマニュアル (32 ページ)
![Sharp AL-1633 ソフトウェア・セットアップ・マニュアル](/uploads/products/server2/5048023/5048023.png)
CONFIGURING THE PRINTER DRIVER
After installing the MFP driver (printer driver), you must configure the printer driver settings appropriately for the
number of paper trays on the machine and the size of paper loaded in each.
1
Click the "start" button, click "Control
Panel", click "Printers and Other Hardware",
and then click "Printers and Faxes".
In operating systems other than Windows XP, click the
"Start" button, select "Settings", and then click "Printers".
2
Click the "SHARP AL-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
If you are using Windows NT 4.0/2000/XP, go to step 4.
3
In Windows 95/98/Me, click the "Setup" tab.
4
Click the "Configuration" tab.
5
Click the "Set Tray Status" button and
select the size of paper that is loaded
in each tray.
Select a tray in the "Paper source" menu, and
select the size of paper loaded in that tray from the
"Setting Paper Size" menu. Repeat for each tray.
Be sure to configure the above "Set Tray Status"
Caution
settings, and then when printing specify a tray
other than "Auto Select" in "Paper Source" in the
"Paper" tab of the printer driver setup screen.
6
Click the "OK" button in the "Set Tray
Status" window.
7
Click the "OK" button in the printer
properties window.
11