- ページ 7

オール・イン・ワン・プリンター Sharp AR-5320のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-5320 20 ページ。 Mono laser copier/printer
Sharp AR-5320 にも：ソフトウェア・セットアップ・マニュアル (16 ページ), パンフレット＆スペック (4 ページ)

ページを印刷する

[7] SIMULATIONS

1. Entering the simulation mode

Perform the following procedure to enter the simulation mode.

"#" key

Interrupt key

"C" key

Main code

Start key

Sub code

2. Canceling the simulation mode

When the clear all key is pressed, the simulation mode is cancelled.

When the interruption key is pressed, the process is interrupted and the

screen returns to the sub code entering display.

After canceling the simulation mode, be sure to turn OFF/ON the

power and check the operation.

Note: If the machine is terminated by a jam error or paper empty during

copying in the adjustment by the simulation, recopying is required.

3. List of simulations

Main

Sub

code

Mirror scanning operation

Mirror home position sensor (MHPS) status display

Mirror scanning operation aging

Single paper feeder (SPF) aging

SPF sensor status display

SPF motor operation check

SPG paper feed solenoid operation check

SPF PS release solenoid operation check

Operation panel display check

Fusing lamp and cooling fan operation check

Copy lamp lighting check

Paper feed solenoid operation check

Resist roller solenoid operation check

Cassette semi-circular roller cleaning

Warm-up display and aging with jam

Intermittent aging

Shifting with warm-up display

Developing bias output

Main charger output (Grid = HIGH)

Main charger output (Grid = LOW)

Transfer charger output

Toner motor operation

Trouble cancel (except for U2)

U2 trouble cancel

Maintenance counter clear

Maintenance cycle setting

Mini maintenance cycle setting

Maintenance counter display

Maintenance preset display

Jam memory display

Jam total counter display

Total counter display

Developing counter display

Mini maintenance preset display

SPF counter display

Paper feed counter display

Drum counter display

CRUM type display

P-ROM version display

Interrupt key

Start key

Contents

AR-5316/5320 SIMULATIONS 7-1

Main

Sub

code

Trouble memory display

Copy counter display

Printer counter display

Scanner counter display

SPF jam counter display

Jam total counter clear

Trouble memory clear

SPF counter clear

Paper feed counter clear

Drum counter clear

Copy counter clear

Printer counter clear

Scanner counter clear

SPF jam total counter clear

Main motor operation check

Polygon motor operation check

Size setting

Auditor setting

Count mode setting

Destination setting

Machine condition check (CPM)

Toner save mode setting

CE mark conformity control ON/OFF

Auditor mode exclusive setup

Cancel of stop at maintenance life over

Cancel of stop at developer life over

Cancel of stop at drum life over

Memory capacity check

Transfer ON/OFF timing control setting

Side void amount setting

Copy temporary stop function setting

Paper sensor status display

Developing counter clear

Fusing temperature setting

Standby mode fusing fan rotation setting

Fusing paper interval control allow/inhibit setting

Transfer current setting

Setting of rotation time before toner supply

Copy density adjustment (300dpi)

Copy density adjustment (600dpi)

Copy exposure level adjustment, individual setting

(Text) 300dpi

Copy exposure level adjustment, individual setting

(Text) 600dpi

Copy exposure level adjustment, individual setting

(Photo) 600dpi

Image contrast adjustment (300dpi)

Exposure mode setting

(Gamma table setting/AE operation mode setting/

Photo image process setting)

SPF exposure correction

Image contrast adjustment (600dpi)

AE limit setting

Image sharpness adjustment

Main scanning magnification ratio adjustment

SPF/RSPF mode sub scanning magnification ratio

adjustment in copying

Flash ROM program writing mode

Standby mode fusing fan RPM setting

Contents