- ページ 22
オール・イン・ワン・プリンター Sharp AR-C260のPDF ネットワークスキャナの操作をオンラインで閲覧またはダウンロードできます。Sharp AR-C260 42 ページ。 Color adjustment
Sharp AR-C260 にも： キー操作マニュアル (19 ページ), プリンター操作マニュアル (50 ページ), ソフトウェア・インストール・マニュアル (25 ページ), カラーマネジメント・マニュアル (8 ページ), インストレーション・マニュアル (15 ページ), ユーザーマニュアル (8 ページ)
ページを印刷する
SCANNING
EXPOSURE, RESOLUTION, AND FILE FORMAT)
When sending an image, you can adjust the original size, exposure, resolution, and file format settings as needed.
MANUALLY SETTING THE SCANNING SIZE
If you load an original that is not a standard size (such as an inch size), or if you wish to change the scanning size,
touch the [ORIGINAL] key and set the original size manually.
Perform the following steps after loading the document in the reversing automatic document feeder or on the document glass.
NOTE
Standard sizes that can be detected are as follows:
A3, B4, A4, A4R, B5, B5R, A5. (11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2")
If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or
the original size may not appear at all.
1
Touch the [ORIGINAL] key.
LOWER
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO
A4
ORIGINAL
Touch the [MANUAL] key.
2
ORIGINAL SIZE
UTO
MANUAL
2-SIDED
2-SID
1-SIDED
BOOKLET
TABLE
ROTATE THE IMAGE 90 DEGREES
NOTE
If you wish to rotate the original 90° when creating an
image file, click the "ROTATE THE IMAGE 90
DEGREES" checkbox (a checkmark should appear
in the box).
3
Touch the desired original size key.
ORIGINAL SIZE
OK
OK
AUTO
MANUAL
A5
A5R
B5
B5R
A4
A4R
B4
A3
AB
INCH
EXTRA SIZE
NOTE
You can return to automatic detection by pressing the [CA] key.
SETTINGS
The sizes that can be
selected are displayed.
O
[AUTO] is no longer
highlighted. [MANUAL]
is highlighted.
The original size key you
touched are highlighted.
TABLE OF CONTENTS
(ORIGINAL
If you wish to select an inch size, touch the [INCH]
key and then touch the desired original size key.
ORIGINAL SIZE
OK
OK
AUTO
MANUAL
1 /
1 /
1 /
1 /
1 /
1 /
5 X8
5 X8 R
8 X11
8 X11R
2
2
2
2
2
2
8 X13
1 /
8 X14
1 /
11X17
2
2
AB
INCH
EXTRA SIZE
If you wish to select a custom size, touch the
[EXTRA SIZE] key and enter the size of the original
ORIGINAL SIZE
OK
OK
AUTO
MANUAL
(10 432)
X
210
mm
(10 297)
Y
297
mm
AB
INCH
EXTRA SIZE
17") in the X direction and 10 to 297 mm (1/2" to 11-5/8")
in the Y direction, set in increments of 1 mm (3/64").
Touch the outer [OK] key.
4
OK
OK
OK
OK
MANUAL
MANUAL
B5
B5
B5R
B5R
5
The selected size appears in the top half of
the [ORIGINAL] key.
LOWER
RESOLUTION
PROGRAMMED
FILE FORMAT
A4
ORIGINAL
20
SIZE,
[INCH]
is
highlighted
and inch size keys are
displayed.
To return to the AB
palette, touch the [AB]
key once again.
Touch the [X] key and
use the
or
keys
to set the length in the X
direction, and then touch
the [Y] key and do the
same for the Y direction.
The length can be within the
range 10 to 432 mm (1/2" to
You will return to the
initial screen.
Touching the inner [OK]
key in the step above
returns you to step 2.