- ページ 10

オール・イン・ワン・プリンター Sharp AR-C260のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-C260 15 ページ。 Color adjustment
Sharp AR-C260 にも：ネットワークスキャナの操作 (42 ページ), キー操作マニュアル (19 ページ), プリンター操作マニュアル (50 ページ), ソフトウェア・インストール・マニュアル (25 ページ), カラーマネジメント・マニュアル (8 ページ), ユーザーマニュアル (8 ページ)

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

Installation method 2

Use this procedure to install the software in the following environments:

1. Printer connected by LAN cable

2. Windows version: Windows NT 4.0/2000/Windows XP

3. Using the Windows LPR printing function

NOTES

G To install the software using the installer, you must have administrator's rights.

G In order to print using LPR, LPR port must be added. Go to [Start] - [Settings] - [Control Panel] - [Add /Remove

Programs] - [Add/Remove Windows Components] and open [Windows Components Wizard]. In [Components]

select [Other Network File and Print Services], click [Detail], select [Print Services for Unix] and click [OK].

[Windows Component Wizard] will be displayed. After the component is added, click on [Finish]. LPR port is

added.

G When using Windows NT 4.0, "Microsoft TCP/IP printing" is required to use the machine as a network printer.

Install the software as follows.

The following steps use Windows 2000/XP as an example. Install the software in Windows NT 4.0 in the same

way.

Set the IP address of the machine

To set the IP address of the machine, see step 1 of "Installation method 1" on page 6.

Installing the software in Windows NT 4.0/2000/XP

To install the software, see step 3 of "Installation method 1" on page 6.

Change the printer port from "LPT1" to the network port of the machine

3-1 Click the [Start] button, select [Settings],

and then click [Printers].

3-2 Right-click the SHARP AR-C260 series

printer driver icon and then select

[Properties] from the shortcut menu.

3-3 Click the [Add Port] button in the [Ports]

tab, select "LPR Port", and then click the

[New Port] button.

3-4 Enter the IP address in "Name or address

of server providing lpd:" in the "Add LPR

compatible printer" screen, enter "lp" in

"Name of printer or print queue on that

server:", and then click the [OK] button.

Follow steps 5 to 7 on page 7 to automatically configure the peripheral devices

installed on the machine. (This can only be used when using the machine in a

3-5 Make sure that a checkmark appears by

the printer port for which you entered the

IP address (example: 10.36.128.226) in

Step 3-4, and then click the [Apply]

button.

The machine is now connected to your computer

on the network.