- ページ 39

オール・イン・ワン・プリンター Sharp AR-C260MのPDF ネットワークスキャナの操作をオンラインで閲覧またはダウンロードできます。Sharp AR-C260M 42 ページ。 Color adjustment
Sharp AR-C260M にも：キー操作マニュアル (19 ページ), プリンター操作マニュアル (50 ページ), ソフトウェア・インストール・マニュアル (25 ページ), カラーマネジメント・マニュアル (8 ページ), インストレーション・マニュアル (15 ページ), ユーザーマニュアル (8 ページ)

Supplementary explanation of key operation

for key operator programs

KEY OPERATOR PROGRAMS

N/W SCANNER SETTINGS

DEFAULT DISPLAY SETTINGS

INITIAL RESOLUTION SETTING

DEFAULT SENDER SET

The name of the program category or particular item to be set will appear on the touch key. A touch of the key

will select the item displayed.

G Check mark boxes are touch keys that show the status of selections. A box with a check mark means the

function is "on" (enabled) and an unchecked box means the function is "off" (disabled). Alternate touches of

a box will change the on/off status.

If a program step requires more than one screen to display all available settings for a program step,

arrow touch keys on the setting screens allow access to the available selections on all screens. If a selection is

accepted on one of the screens by a touch of the [OK] key, the display will return through the previous selection

screens within the same setting step to confirm the settings. After all settings are confirmed, the [OK] key must

be pushed again to advance to the next step.

The currently set numerical value is displayed.

Numerical values can be set by touching the

SETTING PROGRAMS

The setting programs for the network scanner feature of the machine are explained here.

Network scanner settings

The following programs are available:

Default display settings

The number of direct address keys displayed setting

Initial resolution setting

Scan complete sound setting

Default sender set

Compression mode at broadcasting

Initial file format setting

Maximum size of e-mail attachments

Default display settings

You can select the initial display that appears when

you press the [IMAGE SEND] key to change to

scanner mode or when you press the [CA] key in

scanner mode. Normally the initial display is set to

the

Condition setting screen

The following three selections are available:

G Condition setting screen

G Address directory (ABC)

G Address directory (Group)

When an address directory (ABC or Group) is

selected, the selected index of that address