- ページ 5

オール・イン・ワン・プリンター Sharp AR-M160のPDF ソフトウェア・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M160 20 ページ。 Digital document solutions
Sharp AR-M160 にも：オンラインマニュアル (33 ページ), パンフレット＆スペック (6 ページ)

ページを印刷する

BEFORE INSTALLATION

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements before installing the software.

Computer type

Operating system*

Display

Hard disk free space

Other hardware requirements

*1 The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0

driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP that Microsoft provides

through its "Windows Update" is installed.

*2 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home

Edition preinstalled models equipped with a USB interface as standard.

*3 Printing is not available in MS-DOS mode.

*4 Administrator's rights are required to install the software using the installer.

INSTALLATION ENVIRONMENT AND USEABLE

SOFTWARE

The software that can be installed varies depending on the operating system and type of connection to the machine.

Windows 98/Me/2000/XP

USB 1.1 connection

Windows 98/Me/2000/XP

1, 2

USB 2.0 connection*

Windows 95/98/Me/NT 4.0/2000/XP

Parallel connection

*1 A USB 2.0 connection can only be used when the dual function board is installed.

*2 Windows 98/Me does not support USB 2.0. A USB 2.0 connection can be used in Windows 98/Me, however, the performance

will be the same as USB 1.1. The print speed based on USB 2.0 specifications can only be attained if your computer is

running Windows 2000/XP, and you are using a cable that supports USB 2.0 (USB 1.1 or USB 2.0 certified), and the cable is

connected to a USB 2.0 port on your computer. If the connection is made through a hub, the hub must support USB 2.0.

*3 When the machine is connected using a parallel cable, the Print Status Window can only be used when the parallel port is set

to ECP mode. To set the parallel port mode, refer to your computer manual or ask the manufacturer of your computer.

*4 The printer driver that is installed will vary depending on the type of connection between the machine and your computer.

*5 Sharpdesk can be installed when using a parallel cable, however, the machine's scanner function cannot be used.

INSTALLATION ENVIRONMENT AND INSTALLATION

PROCEDURE

Follow the appropriate installation procedure for your operating system and type of cable as indicated below.

Operating system

Windows XP

Windows 98/Me/2000

Windows 95/NT 4.0

IBM PC/AT or compatible computer equipped with a USB 2.0*

interface (IEEE 1284)

Windows 95, Windows 98, Windows Me,

Windows NT Workstation 4.0 (Service Pack 5 or later)

Windows 2000 Professional

Windows XP Home Edition

800 x 600 dots (SVGA) display with 256 colors (or better)

150 MB or more

An environment on which any of the operating systems listed above can fully operate

Printer driver

Available*

Cable

USB/Parallel

INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) (p. 4)

USB

INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE) (p. 6)

Parallel

INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) (p. 8)

Parallel

INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) (p. 8)

, Windows XP Professional

MFP Driver

Scanner

driver

Available

3, 4

Not Available

Procedure to follow

/1.1*

or bi-directional parallel

Button

Sharpdesk

Manager

Available

Not Available

Available