- ページ 25

オール・イン・ワン・プリンター Sharp AR-M161のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M161 35 ページ。 Digital multifunctional system

ページを印刷する

BUTTON MANAGER

Button Manager is a software utility that allows the scanner function to be used by means of the [SCAN] key on the

machine. The Button Manager software allows you to assign a destination application and scan settings to each of

the six destinations on the machine.

To scan using the machine's operation panel, settings must be configured in the Control Panel after Button Manager

is installed. To install Button Manager and configure settings, see "SETTING UP BUTTON MANAGER" in "1.

INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)" in the "Software setup guide".

Setup window

To view Help for a setting, click the

(Scan Button Destination Settings screen) and then click the setting.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(1)

Tab

Select the desired destination. The tabs contain

scan settings for each of the scan destinations

(SC1 through SC6) on the machine.

(2)

"Application Selection" area

Select the application that starts up here.

(3)

[Show TWAIN setting screen when scanning]

checkbox

Select whether or not the TWAIN screen is

shown when scanning. When the checkbox is

selected, the TWAIN screen appears when

scanning is executed to let you adjust the

scanning conditions.

(4)

"Scan Setup" area

Set the scan conditions.

The scan settings for each of the six destinations can be changed in Button Manager.

To change the settings, see

When the dual function board is installed

Note

If computers are connected to both of the two USB ports on the machine, separate Button Manager settings can

be configured on each computer.

button in the upper right-hand corner of the Button Manager setup window

"BUTTON MANAGER SETTINGS" (page

(5)

[OK] button

Click to save your settings and close the dialog

box.

(6)

[Cancel] button

Click this button to close the dialog box without

making any changes to the settings.

(7)

[Apply] button

Click to save your settings without closing the

dialog box.

(8)

[Help] button

Click this button to display the help file for Button

Manager.

25).