- ページ 13

オール・イン・ワン・プリンター Sharp AR-M256のPDF キー操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M256 24 ページ。 Digital multifunctional system key operator's guide
Sharp AR-M256 にも：操作マニュアル (4 ページ), オンラインマニュアル (36 ページ), セットアップマニュアル (20 ページ), 操作マニュアル (48 ページ)

ページを印刷する

OPERATION SETTINGS

KEY OPERATOR PROGRAMS

OPERATION SETTINGS

AUTO CLEAR SETTING

MESSAGE TIME SETTING

KEYS TOUCH SOUND

The "OPERATION SETTINGS" are related to basic

operation of the machine and consist of the following

programs:

● AUTO CLEAR SETTING

● MESSAGE TIME SETTING

● KEYS TOUCH SOUND

● TOUCH KEY OPERATION SETTING

● DISABLE INTERRUPT PRINT JOB

● STREAM FEEDING MODE

● DISPLAY LANGUAGE SETTING

● DISABLE DISPLAY TIMEOUT

● DISABLING OF TRAY SETTINGS

● DISABLING OF CLOCK ADJUSTMENT

AUTO CLEAR SETTING

If no action is taken for a certain length of time when

viewing information on finished jobs, jobs in progress,

or stored jobs, the auto clear function activates and

returns the display to the initial screen of copy mode or

the job status screen. AUTO CLEAR SETTING is used

to set the amount of time that must elapse for the auto

clear function to activate. The time can be set from 10

seconds to 240 seconds in increments of 10 seconds,

or the auto clear function can be disabled. (This setting

only operates in copy mode and network scanner

mode.)

The factory default setting is "60" (sec.).

MESSAGE TIME SETTING

This program is used to set the length of time that

messages appear in the display (this applies to

messages that appear for a certain length of time and

then automatically disappear.)

The time can be set to as long as 12 seconds in

increments of one second.

The factory default setting is "6" (sec.).

1/3

60sec

6sec

KEYS TOUCH SOUND

This program is used to select whether or not a beep is

sounded when a key is touched, and if sounded, what

type of beep.

The program is also use to select whether or not a

special key touch beep is sounded at the initial point of

a setting.

The factory default settings are as follows:

• KEYS TOUCH SOUND: Short

• KEYS TOUCH SOUND AT INITIAL POINT: Disabled

KEY OPERATOR PROGRAMS

KEYS TOUCH SOUND

KEYS TOUCH SOUND AT INITIAL POINT

key .... Touch this key to select a short beep

volume. A single short beep indicates a

valid key, and a double short beep indicates

an invalid key.

key .... Touch this key to select a long beep

volume. A single long beep indicates a valid

key, and a double long beep indicates an

invalid key.

key .... Touch this key to disable key touch beeps.

Select the [KEYS TOUCH SOUND AT INITIAL POINT]

checkbox to have three long beeps sound (when the

beep volume is set to long) or three short beeps sound

(when the beep volume is set to short) when the initial

point of a setting is reached while selecting basic settings.

The initial point settings are as follows:

Mode

Initial point (set from initial screen)

Copy mode

Ratio: 100%

Exposure: 3

Fax mode

Exposure: 3

Network scanner

Exposure setting: 3

mode

TOUCH KEY OPERATION SETTING

These programs are used to set the length of time that

must elapse until a setting is entered after a key is

touched, and to disable key repeat.

The setting entry time can be set from 0.0 seconds to

2.0 seconds in increments of 0.5 seconds.

When [DISABLE AUTO KEY REPEAT] is enabled, only

one touch is registered if key is touched continuously.

The factory default settings are as follows:

• Time to entry: 0.0 (sec.)

• DISABLE AUTO KEY REPEAT: Disabled

DISABLE INTERRUPT PRINT JOB

(When the printer function is enabled)

Enable this program if you wish to prevent pausing of

printing for interrupt copy jobs.

This program is initially disabled (factory default setting).

GENERAL PROGRAMS