- ページ 16
オール・イン・ワン・プリンター Sharp AR-M317 AR-5625のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M317 AR-5625 20 ページ。 Operation manual for network scanner
Sharp AR-M317 AR-5625 にも： 操作マニュアル (4 ページ), パンフレット＆スペック (8 ページ), 仕様書 (2 ページ), オンラインマニュアル (36 ページ), 操作マニュアル (48 ページ)
ページを印刷する
CONFIGURING THE PRINTER DRIVER
After installing the printer driver, you must configure the printer driver settings appropriately for the
number of paper trays on the machine and the size of paper loaded in each tray.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers and
Faxes".
In operating systems other than Windows XP,
click the "Start" button, select "Settings", and
then click "Printers".
2
Click the "SHARP AR-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
If you are using Windows NT 4.0/2000/XP, go to
step 4.
3
In Windows 98/Me, click the "Setup"
tab.
4
Click the "Configuration" tab and set
the printer configuration based on the
options that have been installed.
Set the printer configuration properly.
Otherwise, printing may not take place
correctly.
14
5
Click the "Set Tray Status" button and
select the size of paper that is loaded in
each tray.
Select a tray in the "Paper source" menu,
and select the size of paper loaded in that
tray from the "Set Paper Size" menu.
Repeat for each tray.
6
Click the "OK" button in the "Set Tray
Status" window.
7
Click the "OK" button in the printer
properties window.