- ページ 22
オール・イン・ワン・プリンター Sharp AR-M317 AR-5625のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M317 AR-5625 48 ページ。 Operation manual for network scanner
Sharp AR-M317 AR-5625 にも： 操作マニュアル (4 ページ), パンフレット＆スペック (8 ページ), 仕様書 (2 ページ), オンラインマニュアル (36 ページ), セットアップマニュアル (20 ページ)
ページを印刷する
Chapter 2
2
HOW TO USE THE NETWORK SCANNER FUNCTION
SENDING AN IMAGE
BASIC TRANSMISSION METHOD
1
Make sure the machine is in scanner
mode.
COPY
PRINT
SCAN
2
Load the original.
You cannot load documents in both the
Note
RSPF and on the document glass and send
them in a single transmission. If documents
are loaded in both the RSPF and on the
document glass, only the document in the
RSPF will be scanned and transmitted.
3
Check the original size that appears in
the top half of the [ORIGINAL] key.
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
ORIGINAL
• To scan a two-sided original (when an RSPF
Note
is installed), refer to page 24.
• If you are scanning a large number of
originals (and the RSPF is installed), follow
the procedure on page 25.
• To rotate the document image 90° before
transmission, see page 26.
20
When the [SCAN] key
light is on, the machine is
in scanner mode. If the
ON LI
light is not on, press the
DATA
[SCAN] key.
If user authentication is
DATA
enabled, you must log in.
(p.17)
For detailed information
on loading an original,
refer to the operation
manual for copier.
The original size is
automatically detected.
If you loaded a
non-standard size
document or wish to
change the scanning size,
touch the [ORIGINAL] key
and set the document
size. (Refer to page 26.)
4
Adjust the quality setting. (p.27)
AUTO
QUALITY
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
5
Adjust the resolution setting. (p.28)
QUALITY
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
ORIGINAL
6
Select the file format. (p.29)
QUALITY
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
ORIGINAL
7
Touch the [ADDRESS BOOK] key.
ADDRESS
BOOK
ADDRESS REVIEW
ADDRESS ENTRY
SEND SETTINGS
The factory default
settings are:
• Image quality:
TEXT/PHOTO
• Density: AUTO
The factory default
setting is "300dpi".
The factory default
settings are:
• FILE TYPE: TIFF
• COMPRESSION MODE:
MMR (G4)
• PAGES PER FILE: ALL
The address book screen
appears.