- ページ 13
オール・イン・ワン・プリンター Sharp AR-M350 ImagerのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-M350 Imager 32 ページ。 Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Sharp AR-M350 Imager にも： パンフレット＆スペック (11 ページ), パーツマニュアル (30 ページ), 詰め替えマニュアル (8 ページ), 操作マニュアル (40 ページ)
ページを印刷する
SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL
A two-sided original can be automatically scanned and transmitted using the auto document feeder. Follow the steps
below.
1
Make sure the machine is in scanner mode and
then load the document in the auto document
feeder.
2
Touch the ORIGINAL key.
STANDARD
RESOLUTION
AUTO
8 X11
1 /
2
ORIGINAL
3
Touch the 2-SIDED BOOKLET key or the 2-
SIDED TABLET key as appropriate for the
original you loaded.
ORIGINAL SIZE
AUTO
MANUAL
2-SIDED
2-SIDED
BOOKLET
TABLET
NOTES
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided originals
that are bound at the top are tablets.
• Two-sided scanning turns off after the document is stored in memory. Pressing the
CA key will also cancel two-sided scanning.
When
you
touch
the
ORIGINAL key, check the
original size displayed in the
key.
If necessary, touch the
MANUAL key and set the
original size. (Page 13)
4
Touch the OK key.
OK
L
ED
A two-sided original icon appears next to the ORIGINAL key.
(Example: The icon that appears when the 2-SIDED
BOOKLET key is touched.)
STANDARD
RESOLUTION
AUTO
8 X11
1 /
2
ORIGINAL
5
Continue from step 4 of "Basic transmission
method" (pages 8 to 9).
Booklet
SENDING AN IMAGE
You will return to the initial
screen.
Tablet
11