- ページ 35

オール・イン・ワン・プリンター Sharp AR-NB3のPDF オプション・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-NB3 44 ページ。 Digital copier/printer/multifunctional system option
Sharp AR-NB3 にも：印刷マニュアル (41 ページ), ネットワークスキャナの操作 (40 ページ)

ページを印刷する

1. 1 ] Configuration

LEAD-FREE SOLDER

The PWB's of this model employs lead-free solder. The "LF" marks indicated on the PWB's and the Service Manual mean "Lead-Free" solder. The

alphabet following the LF mark shows the kind of lead-free solder.

Example:

Lead-Free

5mm

(1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD

When repairing a lead-free solder PWB, use lead-free solder thread. Never use conventional lead solder thread, which may cause a breakdown or an

accident.

Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use sol-

dering iron is recommendable.

(2) NOTE FOR SOLDERING WORK

Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity

is inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may

exceed the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is

confirmed.

Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.

If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after com-

pletion of soldering work.

If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.

Solder composition

code (Refer to the

table at the right.)

Solder composition

Solder composition code

Sn-Ag-Cu

Sn-Ag-Bi

Sn-Ag-Bi-Cu

Sn-Zn-Bi

Sn-In-Ag-Bi

Sn-Cu-Ni

Sn-Ag-Sb

Bi-Sn-Ag-P

Bi-Sn-Ag