ページを印刷する
SJ-2047
SJ-2050
SJ-2060
(2) Fixing of Fan motor and Fan
(2)-1 Stick U-sealer handle to Fan motor holder A.
(2)-2 Insert the terminals of Lead EV-cover ass'y to
R-fan motor.
(2)-3 Fix two Motor cushions to R-fan motor, and set it
at Fan motor holder A and B.
Then fix with Tapping screw.
(2)-4 Set Fan clamp to Propeller fan 100 and insert
it to the shaft of Fan motor.
Fan motor holder A
+
0 1mm
U-sealer handle
SEC. C-C
Figure A-13
Motor cushion
Fan motor
holder A
Lead EV-cover ass'y
Figure A-14
D
Fan clamp
Propeller
fan 100
+
4 0.5mm
Figure A-15
16
C
C
U-sealer handle
Fan motor
holder B
Tapping
screw
Fan motor
RED
BROWN
Fan clamp
Slit
Slit of each Fan clamp
and Propeller fan
should not be at same position.
Shaft
Detail of D