- ページ 14

冷蔵庫 Sharp SJ-VX57ES-DSのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp SJ-VX57ES-DS 32 ページ。
Sharp SJ-VX57ES-DS にも：操作マニュアル (16 ページ)

ページを印刷する

Care and cleaning

Important

Follow the tips below to prevent cracks on the

inner surfaces and plastic components

• Wipe out food oil adhered to plastic parts.

• Some household chemicals may cause damage, so

use only diluted washing-up liquid (soapy water).

• If undiluted detergent is used or soapy water is not

wiped off thoroughly, it may result in cracks of plastic

parts.

Cleaning

For hygienic reasons, make sure to do following

things regularly.

• Remove the accessories (e.g. shelves) from the cabinet

and the door. Wash them by warm soapy dishwashing

water. After that, rinse them in clean water and dry.

• Clean the inside with a cloth soaked in warm soapy

dishwashing water. Then, use cold water to wipe off

soapy water thoroughly.

• Wipe the exterior with a soft cloth each time it gets

dirty.

• Clean the magnetic door seal with a toothbrush and

warm soapy dishwashing water.

• Wipe the control panel with a dry cloth.

<SJ-F821VM, SJ-F921VM, SJ-VX57ES, SJ-FTF525BVP >

Note

• After cleaning, make sure to put the shelves and the

cases on original position.

• Do not use heavy-duty cleansers or solvents (lacquer,

paint, polishing powder, benzine, boiled water, etc.)

which may cause damages.

• If you pull out the power plug once, wait 5 minutes at

least before connecting the power plug again.

• The glass shelves are heavy to carry. Hold them rmly

when you remove the shelves from the cabinet.

• Do not drop objects inside the refrigerator or strike the

inner wall. This may cause cracks to inner surface.

Before transporting

Wipe up water in the evaporating pan. Before wiping

up the water, wait more than 1 hour after pulling out the

plug because refrigeration cycle equipment is extremely

hot. (The evaporating pan is located on the rear of the

product.)

Defrosting of the

cooling unit

Defrosting is automatically operated by a unique energy

saving system. (Approx. once a day.) Ice making takes

time because the temperature inside becomes slightly

higher than usual during the defrosting.

When the compartment

light is blown

Contact the service agent approved by SHARP to

replace the light. The light is not to be replaced other

than by quali ed service personnel.

Switching off your

refrigerator

If the refrigerator needs to be switched off for an

extended period, the following steps should be taken to

reduce the growth of mold

1. Remove all food.

2. Remove the power plug from the socket.

3. Clean and dry the interior thoroughly.

4. Keep all the doors open slightly for a few days to dry.

Evaporating pan