ページを印刷する
Fresh zone temperature control
Temperature of the fresh zone can be adjusted
according to the type of storage food.
•
When the knob is placed at the "Crisper" position,
you can use the chiller zone as a crisper. It is suitable
for maintaining the appropriate temperature and humidity
for fruits and vegetables.
•
When the knob is placed at the "Fresh" position,
it is suitable for short-term storage of fish or other fresh
food. This is the best way to keep freshness.
In this case, it is recommended to set the refrigerator
temperature below 4°C and usethe food within 3 days.
Knob
Humidity adjustment for crisper zone
Humidity of the crisper zone can be adjusted.
•
It is suitable for vegetables when the knob is placed
on the right.
•
It is suitable for fruits when the knob is placed
on the left.
Knob
Low
Fresh
Crisper
Humidity
Care and cleaning
Important
To prevent cracks on inside surfaces and plastic
components, follow these tips.
•
Wipe out food oil adhered to plastic parts.
Some household chemicals may cause damage, so use
•
only diluted washing-up liquid (soapy water).
•
If undiluted detergent is used or soapy water is not
wiped off thoroughly, it may result in cracks of plastic
parts.
Cleaning
For hygienic reasons, make sure to do following
things regularly.
■
Remove the accessories (e.g. shelves) from the cabinet
and the door. Wash them by warm soapy dishwashing
water. After that, rinse them in clean water and dry.
■
Clean the inside with a cloth soaked in warm soapy
dishwasing water.Then, use cold water to wipe off
soapy water thoroughly.
■
Wipe the exterior with a soft cloth each time it gets dirty.
■
Clean the magnetic door seal with a toothbrush and
warm soapy dishwashing water.
■
Wipe the control panel with a dry cloth.
Note
•
Do not use hot water, household cleaning powders,
creams or spray-on cleaning products, or any other
cleaning products such as mineral turpentine,
methylated spirits, thinners, petrol etc. These may
damage your refrigerator and may void any warranty.
•
If the power supply is disconnected, please wait at least
5 minutes before re-connecting power.
•
The glass shelves are heavy to carry. Hold them firmly
when you remove the shelves from the cabinet .
•
Do not drop objects inside the refrigerator or strike the
inner wall. This may cause cracks to inner surface.
Switching off your refrigerator
If the refrigerator needs to be switched off for an
extended period, the following steps should be
taken to reduce the growth of mold:
1. Remove all food.
2. Remove the power plug from the socket.
3. Clean and dry the interior thoroughly.
4. Keep all the doors open slightly for a few days to dry.
Defrosting
Defrosting is automatically operated by a unique energy
High
saving system.
When the compartment light is blown
Contact the service agent approved by SHARP
to replace the light. The light is not to be replaced other
than by qualified service personnel.
9