![Sharp SJ-XP470HB 操作マニュアル](/uploads/products/server2/5055078/5055078.jpg)
Installation
Description
1
2
3
15
4
5
6
7
8
1.
Door pocket
(4 pcs)
2. Refrigerator shelf
3. Crisper shelf
Fresh zone
4.
5. Bottle pocket
(2 pcs)
6. Freezer tray
(2pcs)
7. Freezer Drawer
(4 pcs)
8. Adjustable foot
(2 pcs)
9. LED light
10.
Plasmacluster indicator
The indicator lights up when you
open the refrigerator door after
setting "Plasmacluster".
11. Chiller zone temperature control
As for the details, refer to chapter
"Operation".
12. Humidity adjustment
As for the details, refer to chapter
"Operation".
13 . Crisper zone
14. Control panel
Following parts are included with shipment in the
freezer drawer.
Egg holder
Large
Ice cube tray
9
10
(3 pcs)
Small
1
11
12
5
13
16
8
15. Vertical bar
Frigure 1
The vertical bar is in
correct position, the door
can be closed.
•There is the heater inside the bar. You may feel
the heat but you can store foods normally.
16. Freezer shelf
How to make ice cubes
• Pour the water into the ice
cube tray.
•
Hold the ice cube tray upside
down and twist the both ends
of the tray to take out the ice
cubes.
Deodorizing unit
Deodorizing catalyst is installed on the routes of cold air.
There is no need to operate and clean.
Door alarm
•
When the refrigerator or freezer door is left open for
over 1 minute, the alarm sounds 5 times (Beep beep
beep beep beep ).
If you do not close the door, the alarm sounds every
30 seconds.
• The alarm stops after close all doors.
14
Frigure 2
The vertical bar is not in
correct position, the door
can not be closed, you should
reposit it as Figure 1.
Water level
5