- ページ 43

プロジェクター Sharp Notevision XG-C435XのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Sharp Notevision XG-C435X 45 ページ。 Sharp xg-c435x: install guide

\ Check if the "TCP/IP" protocol is operating correctly using the "PING" command. Also, check

if an IP address is set.

1. Open a command prompt (MS-DOS Prompt).

2. After launching the command prompt (MS-DOS Prompt) enter a command "PING".

3. When connecting normally, the display will be as follows.

4. When a command cannot be sent, "Request time out" will be displayed.

5. To return to the Windows

A connection cannot be made because you have forgotten your user name or your password.

\ Initialize the settings. (See page 54 of the projector's operation manual.)

\ After the initialization, carry out setting again.

• In the case of Windows

order.

• In the case of Windows

Prompt" in order.

• In the case of Windows

Prompt" in order.

• In the case of Windows

Prompt" in order.

Entry example C:\>Ping XXX.XXX.XXX.XXX

"XXX.XXX.XXX.XXX" should be entered with an IP address to be connected to, such as

the projector.

(The screen may be slightly different depending on the OS type).

<Example> when the IP address connected to is "192.168.150.2"

Check the network setting again.

If communication can still not be established properly, contact your network administrator.

98 or 98SE: click "START" ➔ "Programs" ➔ "MS-DOS Prompt" in

Me: click "START" ➔ "Programs" ➔ "Accessories" ➔ "MS-DOS

2000: click "START" ➔ "Programs" ➔ "Accessories" ➔ "Command

XP: click "START" ➔ "All Programs" ➔ "Accessories" ➔ "Command

screen, enter "exit" and then press the "Enter" key.

Troubleshooting

-43