- ページ 25
プロジェクター Sharp PG-D4010X - XGA DLP ProjectorのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Sharp PG-D4010X - XGA DLP Projector 34 ページ。 True xga/wxga data projectors
Sharp PG-D4010X - XGA DLP Projector にも： 仕様書 (2 ページ), 仕様書 (1 ページ), 仕様 (2 ページ), 仕様 (2 ページ)
ページを印刷する
The setting procedure for each item will be explained. For the basic procedure, please
refer to "Set Items" on page 23.
IP Address Setting
([1]IP Address)
Setting of IP address.
setup>1
IP Address
:192.168.150.2
Please Enter
:192.168.150.3
(change)
—>
192.168.150.3
1 Enter "1" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
setup>2
Subnet Mask
:255.255.255.0
Please Enter
:255.0.0.0
(change)
—>
255.0.0.0
1 Enter "2" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display subnet mask after change (*).
Setting up the Projector Using RS-232C or Telnet
Default Gateway Setting
([3]Default Gateway)
Setting default gateway.
1
setup>3
note: "0.0.0.0" means "Using no default gateway."
2
Gateway Address :0.0.0.0
Please Enter
*
(change)
1 Enter "3" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display gateway address after change (*).
•
If the values for IP Address, Subnet Mask or
Gateway of the projector have been changed
via Telnet, the computer cannot be connected
to the projector depending on the computer's
1
network settings.
2
*
User Name Setting
([4]User Name)
Carrying out security protection using user
name.
setup>4
User Name
Please Enter
(change)
1 Enter "4" and press the "Enter" key.
2 Enter user name and press the "Enter" key.
Display set user name (*).
•
User name can be up to 8 characters.
•
You can input the characters below:
a-z, A-Z, 0-9, -, _
•
In the default state, user name is not set.
:192.168.150.1
—>
192.168.150.1
Note
:
: XX-XXXX
XX-XXXX
—>
Note
1
2
*
1
2
*
-25