- ページ 13

プロジェクター Sharp PG-M10SUのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp PG-M10SU 31 ページ。 Sharp digital multimedia projector pg-m10x, pg-m10s operation manual
Sharp PG-M10SU にも：操作マニュアル (49 ページ)

ページを印刷する

11)Projection lens (See Fig. 11.)

Remove the three screws (S-7) shown in Fig. 11,

and detach the projection lens.

Note: When reassembling, be careful not to damage

the spherical mirror inside of the lens base.

S-7

Projection lens

S-7

Fig. 11

12)Color wheel (See Figs. 12 and 13.)

Remove the two screws (S-9) shown in Fig. 12, and

detach the color wheel from the lens base.

Remove the two screws (S-4) shown in Fig. 13, and

detach the wheel cover from the color wheel.

Remove the wheel screw shown in Fig. 13, and

detach the wheel sensor.

Note: When reassembling, be careful not to tighten

the screws too much. Otherwise the color wheel

mat come in contact with other components

nearby and fail to rotate. Readjustment will be

needed if the color wheel and the wheel sensor

have been replaced. (Refer to page __.)

Color wheel

S-9

Fig. 12

S-9

Fig. 13

13)Light tunnel and aperture (See Fig. 14.)

Remove the three screws (S-7) shown in Fig. 14,

and detach the light tunnel from the lens base.

Remove the two screws (S-4) shown in Fig. 14, and

detach the aperture from the lens base.

Note: Do not disassemble the light tunnel.

Light Tunnel

Aperture

S-4

Fig. 14

PG-M10SU/SE

PG-M10XU/XE

Wheel Cover

Wheel Sensor

S-4

S-7