- ページ 3
医療機器 Accutome 4SightのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Accutome 4Sight 10 ページ。 Ophthalmic diagnostic unit
Accutome 4Sight にも： サービスマニュアル (5 ページ)
ページを印刷する
Quick Reference Guide
A-SCAN
How To Measure A New Patient
1.
Step One: Begin a new patient, by selecting
Patient.
3.
Step Three: Launch A-Scan Mode by clicking the
A-Scan
icon.
5.
Step Five: Prepare by following the immersion shell/
probe setup guidelines.
7.
Step Seven: Pin back patient's lids and place shell
directly over the cornea. Fill shell with BSS past
probe tip until waveforms are displayed on screen.
9.
Step Nine: Ensure all wave forms are within 0.1mm
(immersion) and 0.2mm (contact) and that the
spikes are of sufficient amplitude and exhibit proper
pattern.
You can check through the five scans by tapping
the foot pedal. If you would like to replace a
measurement, press and hold the foot pedal until
scan is deleted, or press the
After scan is deleted, a live waveform pattern will be
on the screen. When spikes are acceptable, release
the foot pedal to capture.
To order in the U.S. and Canada call (800) 979.2020 • (610) 889.0200 International • +31 (0) 485.350300 Europe or visit
New
Insert key
on the PC.
2.
Step Two: Type the patient data into the appropriate
fields.
4.
Step Four: On the measurement screen, choose
your measurement options
Immersion, and
OD/OS); options can be adjusted by
clicking on the associated icon.
6.
Step Six: When in auto mode, begin with foot pedal
pressed.
8.
Step Eight: Release foot pedal when spikes are
acceptable and machine will auto-capture (if
automatic capture mode is selected).
(Eye Type, Contact/
www.accutome.com
| 3