- ページ 18
自転車アクセサリー Shimano BR-M6000のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano BR-M6000 39 ページ。 Hydraulic disc brake
Shimano BR-M6000 にも： ディーラーズマニュアル (39 ページ)
ページを印刷する
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
BR-M7000/BL-M7000
(z)
1
Remove the upper bleed screw and O-ring and insert the oil funnel.
2
To be continued on next page
With the spacer for bleeding (yellow) still
attached to the calipers, place the bicycle
into a bicycle stand, or the like, as shown
in the illustration.
(A)
(B)
Set the brake lever so that it is in riding
position at 45° angle from the ground.
(A)
(B)
(z)
45°
(C)
18
(A)
Hose
(B)
Caliper
NOTE
When bleeding the air out of the caliper, you
will need the SM-DISC (oil funnel and oil
stopper).
(A)
Bleed screw
(B)
O-ring
(C)
Oil funnel
TECH TIPS
Do not insert the oil stopper at this time.