- ページ 18
自転車アクセサリー Shimano DURA-ACE FC-R9100のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano DURA-ACE FC-R9100 21 ページ。 Front chainwheel
Shimano DURA-ACE FC-R9100 にも： ディーラーズマニュアル (21 ページ)
ページを印刷する
INSTALLATION
Installation of the crank
(C)
(z)
(A)
4
(B)
Push in the stopper plate and check that
the plate pin is securely in place, and
then tighten the screws of the left crank
arm.
Tighten both screws equally to the
specified tightening torque (12 - 14 N·m).
(z)
The illustration is of the left crank
arm (cross-section)
18
(A)
Plate pin
(B)
Stopper plate
(C)
Left crank arm
Tightening torque
12 - 14 N·m
NOTICE
•
The two screws should be tightened
alternately in stages rather than each screw
being fully tightened at once.
•
Set the stopper plate in the correct
direction as shown in illustration.