- ページ 27
自転車アクセサリー Shimano ST-RS203のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano ST-RS203 48 ページ。 Shifting lever
ページを印刷する
MAINTENANCE
How to pull out a disconnected inner end (shifting cable)
How to pull out a disconnected inner end (shifting cable)
* If it is hard to pull out the inner end, follow the procedure below.
Remove the lever from the handle, and then remove the bracket cover.
1
2
3
Reattach the unit cover and then tighten the screws.
4
Remove the screw located at the bottom
(A)
of the bracket, and then remove the unit
cover.
(B)
Pull out the inner end on the cable hook
of the winding body.
27
TECH TIPS
Should the inner cable break, it is
recommended that you also replace the cable
guide together with the inner cable in order
to maintain smooth shifting.
(A)
Screwdriver[#1]
(B)
Unit cover
NOTE
At this point, be careful not to touch the
spring accidentally. Doing so could cause a
malfunction.
Spring
Tightening torque
0.2 - 0.25 N·m