- ページ 4

スクーター Shimano E6000 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Shimano E6000 Series 47 ページ。 Total electric power system
Shimano E6000 Series にも：ユーザーマニュアル (38 ページ)

ページを印刷する

User's manuals in other languages are

available at :

http://si.shimano.com

IMPORTANT NOTICE

• Contact the place of purchase or a bicycle dealer for

information on installation and adjustment of the products

which are not found in the user's manual. A dealer's

manual for professional and experienced bicycle mechanics

is available on our website (http://si.shimano.com).

• Do not disassemble or alter this product.

• Use the product according to local laws and regulations.

For safety, be sure to read this user's

manual thoroughly before use, and

follow them for correct use.

Important safety information

Guidelines that require replacement, contact the place of

purchase or a bicycle dealer.

Be sure to observe the following in order to avoid burns or

other injury from fluid leakages, overheating, fire or

explosions.

To ensure safety

DANGER

Handling the battery

• Do not deform, modify, disassemble or apply solder directly

to the battery. Doing so may cause leakage, overheating,

bursting, or ignition of the battery.

• Do not leave the battery near sources of heat such as

heaters. Do not heat the battery or throw it into a ﬁ re.

Doing so may cause bursting or ignition of the battery.

• Do not subject the battery to strong shocks or throw it. If this is

not observed, overheating, bursting, or ﬁ re may occur.

• Do not place the battery into fresh water or sea water, and do

not allow the battery terminals to get wet. Doing so may

cause overheating, bursting, or ignition of the battery.

• Use the battery and charger combination speciﬁ ed by the

company for charging and follow the charging conditions

speciﬁ ed by the company. Not doing so may cause overheating,

bursting, or ignition of the battery.

WARNING

To ensure safe riding

• Do not give too much of your attention to the cycle computer

display while riding, otherwise accidents may result.

• Check that the wheels are securely installed to the bicycle

before commencing riding. If the wheels are not securely

installed, the bicycle may fall over and serious injury may result.

• If riding a power-assisted bicycle, make sure that you are

fully familiar with the starting-off characteristics of the

bicycle before riding it on roads with several vehicle lanes

and pedestrian footpaths. If the bicycle starts off

suddenly, accidents may result.

• Check that the bicycle lights illuminate before riding at night.

Using the product safely

• Be sure to remove the battery and charging cable before

wiring or attaching parts to the bicycle. Otherwise, an

electric shock may result.

• When charging the battery while it is installed on the

bicycle, do not move the bicycle. The power plug for the

battery charger may come loose and not be fully inserted

into the electrical outlet, resulting in risk of ﬁ re.

• When installing this product, be sure to follow the

instructions given in the user's manual. Furthermore, it is

recommended that you use only genuine Shimano parts at

these times. If bolts and nuts are left loosened or the

product is damaged, the bicycle may suddenly fall over and

serious injury may result.

• Do not disassemble the product. Disassembling it may cause

injury to persons.

• After reading the user's manual carefully, keep it in a safe

place for later reference.