- ページ 11

スクーター Shimano E6000 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Shimano E6000 Series 38 ページ。 Total electric power system
Shimano E6000 Series にも：ユーザーマニュアル (47 ページ)

ページを印刷する

Method of use

INTRODUCTION

You cannot use the battery immediately after shipment.

The battery can be used after charging it with the designated charger.

Be sure to charge it before use. The battery can be used when the LED on it lights up.

Charging the battery

Attach the charger plug to the charger connector of the

battery.

Insert it with the groove side of the connector facing

up.

* You cannot insert it with the groove side facing

down.

DANGER

• Use the battery and charger combination specified by the

company for charging and follow the charging conditions

specified by the company. Not doing so may cause

overheating, bursting, or ignition of the battery.

If the bicycle is stored for an extended period of time

immediately after purchase, you will need to charge the battery

before using the bicycle. Once the battery is charged, it starts to

deteriorate.

After charging has started, the LED lamp on the charger

lights up.

You can check the current charging status on the

battery level lamp located on the battery.

Charging (Within 1 hour after the

completion of charging)

Lights up

Charging error

Flashing

Battery disconnected

(1 hour or more after the completion of

Turned

off

charging)

<BT-E6000>

Charger connector

Groove

<BT-E6010>

Groove

Charger LED lamp

Battery level lamp indication

Battery

Backside (no groove)

Charger connector