送信機 Crestron DigitalMedia 8G 401 SeriesのPDF マニュアルよりをオンラインで閲覧またはダウンロードできます。Crestron DigitalMedia 8G 401 Series 2 ページ。 Fiber transmitter
ページを印刷する
DO
GUIDE
DM-TX-401-S/DM-TX-401-S2
DigitalMedia 8G™ Fiber Transmitter 401
DO
Install the Device
The DM-TX-401-S and DM-TX-401-S2 can be placed on a flat surface, mounted into a rack, or
attached to the underside of a table. If rack mounting is desired, use the ST-RMK Rack Mount
Kit (sold separately). If under-table mounting is desired, use the UTK-1U-HALF Under-Table
Mounting Kit (sold separately).
DO
Connect the Device
Connect the device as appropriate for the installation (refer to illustrations through ).
DM-TX-401-S and DM-TX-401-S2 Front Panel Connections (DM-TX-401-S Shown)
DM
USB HID
PWR
RESET
LINK
SETUP
Mouse/Keyboard Input
DM-TX-401-S Rear Panel Connections
Unbalanced Stereo
Line Level Audio Input
To Any
Unbalanced Stereo
Line Level
RS-232
Audio Input
Device
AUDIO IN
R
L
VID
PC
HDMI
DISPLAY PORT
VIDEO IN
DisplayPort
RGB,
Composite
Digital Video/
Video
Component,
Audio Input
Input
S-Video, or
HDMI
®
Composite
Digital Video/
*
Video Input
Audio Input
*
Refer to illustration for PC connector pin assignments.
† Refer to illustration for LAN connector pin assignments.
INPUT
DISPLAY
AUTO VIDEO
HDMI
PORT SELECT
PC
DM-TX-401-S
To IR Device
(e.g., Projector)
or Devices
without RS-232
C
CLASS 1
IR
Ground
G
O
LASER
M
PRODUCT
S G
DM OUT
10BASE-T/
L
I
N
100BASE-TX
K
MMF/SC
24V
0.75A
LAN
Ethernet to Local
Network Device†
24V 0.75A
from Power Pack
(Included)
To DM
®
Switcher,
Receiver, or Other
DM Device
DO
Check the Box
QTY PRODUCT
1
Connector, 2-Pin
1
Connector, 5-Pin
1
Power Pack, 24 Vdc 0.75 A, 100-240 Vac
Not Included: Cables, Mounting Kits
DM-TX-401-S2 Rear Panel Connections
Unbalanced Stereo
Line Level Audio Input
Unbalanced Stereo
To Any
Line Level
RS-232
Audio Input
Device
AUDIO IN
L
R
PC
VID
HDMI
DISPLAY PORT
VIDEO IN
DisplayPort
Composite
RGB,
Digital Video/
Video
Component,
Audio Input
Input
S-Video, or
HDMI
Composite
Digital Video/
Video Input*
Audio Input
*
Refer to illustration for PC connector pin assignments.
† Refer to illustration for LAN connector pin assignments.
PC Connector Pin Assignments
PIN NUM.
Pin 5 Pin 1
Pin 10
Pin 6
1
5
1
2
15
11
3
Pin 15
Pin 11
5
6
7
8
13
14
NOTE:
For best video performance, ground connections
should be kept separate. Do not connect ground wires to the
connector shell. The connector shell is reserved for the cable
shield.
PART NUM.
2003574
2003577
2045865
To IR Device
(e.g., Projector)
or Devices
without RS-232
Ground
C
IR
G
CLASS 1
O
LASER
M
PRODUCT
DM OUT
S G
L
10BASE-T/
I
N
100BASE-TX
K
SMF/LC
24V
0.75A
LAN
Ethernet to Local
Network Device†
24V 0.75A
from Power Pack
(Included)
To DM Switcher,
Receiver, or Other
DM Device
RGB
YPbPr
S-VIDEO COMPOSITE
R
Pr
C
G
Y
Y
B
Pb
COMP
GND
GND
GND
GND
RED_GND
Pr_GND
C_GND
GRN_GND Y_GND
Y_GND
BLU_GND
Pb_GND
H
V