送信機 Crestron DigitalMedia 8G+ DM-TX-201-CのPDF マニュアルよりをオンラインで閲覧またはダウンロードできます。Crestron DigitalMedia 8G+ DM-TX-201-C 2 ページ。
Crestron DigitalMedia 8G+ DM-TX-201-C にも： 補足マニュアル (16 ページ), マニュアルより (2 ページ)
ページを印刷する
DO
DM-TX-201-C
DigitalMedia 8G+
Transmitter 201
®
DO
Mount the DM-TX-201-C
The Crestron
®
DM-TX-201-C can be mounted onto a flat surface or onto a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the device onto a flat surface such as a wall or a
ceiling.
Mounting onto a Rack Rail
Using two mounting screws (not included), mount the left or right mounting flange of the
DM-TX-201-C onto the front or rear rail of a rack.
GUIDE
DO
Check the Box
QTY PRODUCT
1
Power Pack, 24 Vdc 0.75 A, 100-240 Vac
DO
Connect the Device
Connect the device as required for the application.
Front Panel Connections
LAN:
DM OUT:
10BASE-T/
To DM
switcher,
®
100BASE-TX
receiver, or other
Ethernet to/from
DM device or to
local network device
HDBaseT
device
®
NOTE:
The DM OUT port is a PoDM (Power over DM) and HDBaseT
PD (Powered Device) port. To receive PoDM or HDBaseT PoE, the DM-TX-201-C requires a
connection to a DM
®
switcher or other equipment that has a PoDM or HDBaseT PoE PSE (Power
Sourcing Equipment) port. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for
intrabuilding use only and should not be connected to a line that runs outside of the building in which
the PSE is located.
Rear Panel Connections
AUDIO IN:
Unbalanced
stereo line level
component
input
video input
HDMI OUT:
PWR
To HDMI
24 VDC
®
0.75A:
display
From included
power pack
PoE (Power over Ethernet)
®
RGB IN:
HDMI IN:
USB HID:
RGB or
From
From USB HID
HDMI
compliant host
audio/video
or from TT-100
source
series device
PART NUM.
2045865
Ground