- ページ 11

ミキサー Digital Audio Labs LIVEMIX MIX-16のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digital Audio Labs LIVEMIX MIX-16 15 ページ。 Central mixer and power distributor
Digital Audio Labs LIVEMIX MIX-16 にも：ユーザーマニュアル (15 ページ)

ページを印刷する

LIVEMIX SYSTEM EXAMPLES

A Livemix system requires either an analog (AD-24) or digital input (option card), the MIX-16/32

central mixer, and at least one CS-DUO personal mixer. Below are some examples of what a basic

system may look like.

ANALOG INPUT SYSTEM

1 x AD-24 Analog Input Rack Unit

1 x MIX-16 Central Mixer

4 x CS-DUO Dual Mix Personal Mixers

4 x MT-1 Dual Position Mounts

1 x CBL-CAT6-100 Shielded CAT6 Cable 100' **

4 x CBL-CAT6-50 Shielded CAT6 Cable 50'

**Shielded cable between AD-24 and MIX-16 is required. CAT6 is not required, CAT5 is acceptable.

ANALOG OR DIGITAL?

Users receiving their audio from an analog source will use the AD-24. Using the TRS or DB-25 inputs,

audio from the source is made available to the Livemix system.

Users receiving their audio from a digital source will use the Option Card (LM-DANTE-EXP). This is

an option card that is installed in the MIX-16/32 and allows the Livemix system to receive audio from

a digital device or network.

CONTROL SURFACE

Livemix needs at least one connected personal mixer to make a mix. Each Livemix CS-DUO personal

mixer connects via CAT5/CAT6 cable to one of the ports of the MIX-16/32. Using various controls on

the unit, two users can each create their own custom mix, which is then output to headphones, in-ear

monitors or stage monitors, right from the CS-DUO unit.

LIVEMIX MIX-16/32

DIGITAL INPUT SYSTEM

1 x MIX-16 Central Mixer

1 x LM-DANTE-EXP Dante option card

4 x CS-DUO Dual Mix Personal Mixers

4 x MT-1 Dual Position Mounts

1 x CBL-CAT6-100 Shielded CAT6 Cable 100' **

4 x CBL-CAT6-50 Shielded CAT6 Cable 50'